TORRES TORRES, JESUS
INGENIERÍA Y TECNOLOGÍA · Nivel 1
en Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional. Unidad Saltillo. Grupo de Ingeniería Metalúrgica
Doctor en Ciencias en Ingeniería Metalúrgica por Cinvestav-IPN, Unidad Saltillo. México. Profesor-Investigador Titular "3C" en CINVESTAV-IPN, Unidad Saltillo. Investigador Nacional Nivel 1 en el SNI. Campos de investigación: Ingeniería de Fundición, Termodinámica y Cinética de los procesos a Alta Temperatura,...
Doctor en Ciencias en Ingeniería Metalúrgica por Cinvestav-IPN, Unidad Saltillo. México.
Profesor-Investigador Titular "3C" en CINVESTAV-IPN, Unidad Saltillo.
Investigador Nacional Nivel 1 en el SNI.
Campos de investigación: Ingeniería de Fundición, Termodinámica y Cinética de los procesos a Alta Temperatura, Pirometalurgia.
Información*
| Nombre | JESUS TORRES TORRES |
|---|---|
| Área | INGENIERÍAS Y DESARROLLO TECNOLÓGICO |
| Campo | INGENIERÍA Y TECNOLOGÍA |
| Disciplina | TECNOLOGÍA METALÚRGICA |
| Especialidad | PROCESAMIENTO DE METALES |
| CVU | 67982 |
| Institución | |
|---|---|
| Dependencia | UNIDAD SALTILLO |
| Entidad | COAHUILA DE ZARAGOZA |
| Nivel | 1 |
| Vigencia | Inicio: 01/01/2025 |
| Fin: 31/12/2029 |
* Información del primer trimestre de 2026.
Fuente: SECIHTI.
Publicaciones ORCID
- 2021
- Mathematical Modelling for Furnace Design Refining Molten Aluminum.
- 2020
- Effect of MgAl2O4 on the Grogwth of β-Si3Al3O3N5 Prepared by Carbothermal Reduction by Nitriding.
- 2019
- “Reaction Kinetic during Molten Aluminum Refining Using Electron Backscatter Diffraction”
- A Kinetic Study on the Preparation of AlNi Alloys by Aluminothermic Reduction of NiO Powders.
- A-242 Aluminum Aloys Foams Manufacture from Recycling of Beverage Cans.
- Effect of Mg Concentration on the Aluminothermic Reduction of Mn2O3 Particles Obtained from Cathodes of Discharged Alkaline Batteries: Mathematical Modeling and Experimental Results
- A kinetic study on the aluminothermic reduction of ZrO2
- Analysis of the formation of intermetallic compounds in foams Al-Cu-Ni obtained from recycled aluminum cans
- 2017
- Dilatometric and calorimetric studies on the phase transformations of the A380-type aluminum alloy during solidification and heat treatment Journal of Thermal Analysis and Calorimetry
- Physical Properties of the Sr4Al6O12SO4 Ceramic Compound.